Installing The Software; Reinstalling The Operating System; General Installation Procedure - Siemens simatic ipc227e Operating Instructions Manual

Maintaining and repairing the device

6.4 Installing the software

6.4 Installing the software
6.4.1

Reinstalling the operating system

6.4.1.1

General installation procedure

If your operating system is no longer functioning correctly, you can reinstall it in one of two
ways:
● With the Recovery function of the supplied USB stick
● With the Restore function of the supplied USB stick
The USB stick is set up as bootable for these functions. For this purpose, "USB Boot" must
be set to "enabled" in the BIOS Setup.
Note
To install an operating system in UEFI mode, the USB stick must also be booted in
UEFI mode. Since Windows Embedded operating systems are installed in MBR mode, the
USB stick must be booted for the Restore function in Legacy mode.
Note
GPT partitioning in Windows 10
Please note that GPT partitioning should be selected for Windows 10 (GPT: GUID Partition
Table).
Recovery function (only with Windows 7 Ultimate and Windows 10)
NOTICE
Windows Embedded
The Recovery function is not available for Windows Embedded operating systems.
The supplied USB contains the installation program with tools for configuring the drives and
installing the operating system with the supported languages.
The basic language of the installed operating system is English. To add other languages,
install these languages later from the supplied USB stick (Documentation and Drivers).
Contents of the "DocuAndDrivers" directory
The supplied USB stick contains the documentation, hardware drivers and updates.
In Windows, these contents are available via a menu.
Restore function
If you have ordered IPC277E with operating system, the supplied USB stick contains the
Restore function.
72
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E