Siemens simatic ipc227e Operating Instructions Manual page 58

Expanding and assigning parameters to the device
5.2 Installing a PCIe module
Procedure
58
Take the plug-in card holder out
of the housing.
Loosen the screw at the slot
plate.
Do not remove the screw com-
pletely.
Remove the slot plate by pulling
it upwards.
Pull the plug-in card adapter
from the motherboard.
Place the plug-in card onto the
the plug-in card adapter.
Insert the plug-in card.
Ensure that the connector of the
plug-in card adapter has been
inserted correctly into the slot on
the motherboard.
Tighten the screw.
Insert the plug-in card holder into
the housing.
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E