Procedure - installation
1. To install the replacement battery, follow the steps for removing the battery in the reverse
order. A Velcro fastener is provided with the replacement battery.
2. Stick a Velcro fastener on the battery.
3. Replace the Velcro on the cover/enclosure. When sticking on the new Velcro, pay
attention to the position mark on the enclosure.
4. Attach the replacement battery with the Velcro to the Velcro on the cover/enclosure.
Open the device (Page 55)
Operating Instructions, 11/2016, A5E35782395-AB
Maintaining and repairing the device
6.3 Installing and removing hardware