Download  Print this page

Opening The Bios Selection Menu - Siemens simatic ipc227e Operating Instructions Manual

Industrial pc.
Hide thumbs

Advertisement

Technical specifications
7.6 BIOS description
7.6.2

Opening the BIOS selection menu

Procedure
1. Reset the device (warm or cold restart).
Depending on the device version, the default settings can differ from the figures shown.
The following message appears briefly on the display at the end of the self-test:
Press ESC for boot options
2. Press <ESC> to open the BIOS selection menu:
The following keys are available in the BIOS selection menu:
120
Buttons
Function
Continue
Exit selection menu, continue start sequence
Boot Manager
Specify the boot media from which to boot:
Device Management
Start device manager for UEFI boot media
Boot From File
Boot Maintenance Manager:
Secure Boot Option
Configuration settings to start the device in Secure Boot mode. The only
1
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
SCU
Start BIOS Setup via Setup Configuration Utility
Hard disk drive
CD-ROM drive
USB drive (USB boot = enabled)
Boot Options: Set boot order
Driver Options: Configure drivers
Console Options: Configure connected input device
Boot from File: Start from an ".EFI" file
Reset System: Restoring factory settings
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E

Advertisement

   Also See for Siemens simatic ipc227e

Comments to this Manuals

Symbols: 0
Latest comments: