Wall Mounting - Siemens simatic ipc227e Operating Instructions Manual

Installing and connecting the device
3.2 Mounting the device
3.2.3

Wall mounting

Wall mounting is suitable for horizontal mounting of the device.
Requirement
● Two mounting brackets
The mounting brackets are available in two versions - for the basic device versions and
for the PCIe device version. The mounting bracket and four screws are included in the
order variant "Wall mounting".
● A T20 screwdriver
● Four anchors and four screws
Procedure for mounting
36
Place the mounting bracket on
the rear of the device.
Secure the mounting bracket
with 2 screws.
Place the device with the mount-
ing brackets onto the mounting
surface.
Mark the fixing holes.
Drill the fixing holes.
Insert the anchors in the drilled
holes.
Screw on the device.
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E