Download  Print this page

Permitted Mounting Positions - Siemens simatic ipc227e Operating Instructions Manual

Industrial pc.
Hide thumbs



Permitted mounting positions

The following mounting positions are permitted:
● Horizontal mounting position
The horizontal mounting position is the preferred position.
● Vertical mounting position – upright mounting
Take into account the permitted temperature range for operation that depends on the
mounting position in accordance with the "Technical specifications (Page 99)" section.
Ensure that the following clearances measurements to another component or to a wall of a
housing are complied with:
● Below the device: ≥ 100 mm
● Above the device: ≥ 50 mm
Operating Instructions, 11/2016, A5E35782395-AB
Installing and connecting the device
3.1 Preparing for installation


   Also See for Siemens simatic ipc227e

Comments to this Manuals

Symbols: 0
Latest comments: