Download  Print this page

Siemens simatic ipc227e Operating Instructions Manual Page 126

Industrial pc.
Hide thumbs

Advertisement

Technical specifications
7.6 BIOS description
USB Configuration
USB BIOS Support
xHCI Mode
USB Per-Port Control
USB Port#
Video Configuration
HPET – HPET support
PCI MMIO Size
Primary Display
IGD Boot Type
SATA Configuration
SATA Controller
Chipset SATA Mode
Security
Supervisor Password
User password
Power on password
User Access Level
Power
Wake on LAN
USB Port1 Wake Capability
USB Port2 Wake Capability
USB Port3/4 Wake Capability
Wake on Touch: The Wake on Touch function can be activated via the operating system. Hibernate is
not activated by default in the operating system.
Follow these steps to activate it:
1. Open the "CMD" program with administrator rights.
2. Enter "powercfg –h on".
3. Enter "Exit" and confirm this with the ENTER key or close the command window.
The IPC can now be set to "Hibernate" via the Start menu.
The IPC is started up again when you touch the screen.
126
Enabled
Auto
Enabled
Enabled
Enabled
1GB
Auto
Auto
Enabled
AHCI
Not installed
Not installed
Disabled
Full
Enabled
Disabled
Disabled
Disabled
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E

Advertisement

   Also See for Siemens simatic ipc227e

Comments to this Manuals

Symbols: 0
Latest comments: