Table of Contents
Advertisement
Servicing and maintenance
10.3 Installing software
10.3
Installing software
10.3
10.3.1
Overview
Introduction
Recommission the device after exchanging the hard disk drive. Or reinstall the software as
required.
Caution
Do not turn off the device during software installation. Otherwise, parts of the software which
are necessary for trouble-free operation will be lost. For commissioning, use the default
BIOS settings described in "BIOS setup" and "BIOS setup default settings" in the section on
"Detailed descriptions."
Note
The supplied drivers and applications have been system-tested and are approved for this
device. No warranty can be provided for other software.
10-38
Operating Instructions, Release 04/2006, A5E00798484-01
SIMATIC Panel PC 577
Advertisement
Table of Contents
