Table of Contents
Advertisement
Intel I210 Gigabit LAN
ASPM
Use this item to set the Active State Power Management (ASPM) level for a PCI-E de-
vice. Select Auto for the system BIOS to automatically set the ASPM level based on the
system configuration. Select Disabled to disable ASPM support. The options are Disable,
L0s, L1, L0sL1, and Auto.
PCIe Speed
Use this feature to select the PCI speed for the device installed in the slot. The options
are Auto, Gen1, and Gen2.
Mini PCIe
ASPM
Use this item to set the Active State Power Management (ASPM) level for a PCI-E de-
vice. Select Auto for the system BIOS to automatically set the ASPM level based on the
system configuration. Select Disabled to disable ASPM support. The options are Disable,
L0s, L1, L0sL1, and Auto.
PCIe Speed
Use this feature to select the PCI speed for the device installed in the slot. The options
are Auto, Gen1, and Gen2.
USB Configuration
USB3.0 Support
Select Enable for USB 3.0 support. The options are Enable and Disable.
XHCI Pre-Boot Driver
Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a pre-boot
drive specified by the user. The options are Enable and Disable.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
USB Rear I/O USB3.0
Select Enabled for rear I/O USB 3.0 support. The options are Disabled and Enabled.
59
Chapter 4: BIOS
Advertisement
Table of Contents
