The Advisor Master Keypad; The Ats111X Keypad - GE Advisor MASTER ATS111 series Manager Manual

6
ATS Control Panel
Manager's manual

The Advisor MASTER keypad

Figure 1. ATS111x keypad

The ATS111x keypad

1 System LEDs
2 Area LEDs
3
CLEAR
3+D
[CLEAR] + ▲
[CLEAR] + ▼
3+E
4 Alphanumeric buttons
5 MENU*
5+D
MENU+ ▲
MENU+ ▼
5+E
6 ENTER
7 OFF
8 LCD Display
9
ON
A
Left/Right arrows (◄&►)
B
OPEN
C For future use
D Up arrow (▲)
E Down arrow (▼)
Open + (1)-(6)
0 + (▲)
0 + (▼)
•
Displays system main power, system faults and alarm.
•
Displays which areas are armed or in alarm.
•
Exits the current function.
•
Increases the keypad buzzer volume.
•
Decreases the keypad buzzer volume.
•
Enters information and codes.
•
Displays the menu login prompt.
•
Backspace to correct an error.
•
Scrolls backwards in the menu.
•
Increases the LCD contrast.
•
Decreases LCD contrast.
•
Completes a step.
•
Decreases LCD contrast.
•
Used after entering your PIN code to disarm the system.
•
Displays messages.
•
Used after entering your PIN code to arm the system.
•
For future use.
•
Opens a door via a valid code (if programmed)
•
For future use.
•
Scrolls up the menu list
•
Updates the information displayed.
•
Scrolls down the menu list
•
Updates the information displayed.
•
Used to perform special tasks. These tasks have to be programmed by the
installer.
•
Changes the mode of word breaking on the end of the display line:
immediate word breaking / hyphenation / no word breaking (4-lines LCD
keypads only - ATS1115/1116).