Table of Contents
Advertisement
ZP3 Fire Control Panel User Guide
Operator menu
Introduction
The panel has built in software functions for carrying routine operator functions and system
checks. These functions are accessed via the operator menu, using the panel keypad. This
section describes these functions, and how to use them.
When using a menu, the LCD screen displays the menu items in place of any alarms or events
that would normally indicate on the screen.
The operator menu is used for the following functions:
•
To set the time and date
•
To identify which version of software is installed in the panel
•
To test the fascia illuminated LED indicators and fascia keypad
•
To view or print reports of the status of the system, or individual devices
•
To view or print previous alarms
Menu access
Access to the menus is via the panel keypad (see Figure 13). Each key is described in Table 11.
Keypad
Figure 13: Keypad
Table 11: Keypad description
Key/s
Revision 11 (05/01/2010)
Name
Description
Numeric keys
Used to enter the number sequences
MENU key
Gives access to the Menu Screen
ENTER key
Used to confirm data entry and save data
ESCAPE key
Exits a function and returns to the previous level
HOME key
Exits all menu's and returns to the system home screen
or event screen (if an event is present)
FUNCTION keys
Used within certain menus
NAVIGATION keys
Used to move up/down/left and right
Page 21
Advertisement
Table of Contents
