Time And Date - GE Advisor MASTER ATS111 series Manager Manual

Table of Contents

Advertisement

54
ATS Control Panel
Manager's manual

15. Time and date

Use this function to program a new time and date.
The time and date can be visible on the display when no alarm, no fault condition is present or no special text
is being programmed. Also all internal system functions rely on a correct time and date setting.
A new date or time only needs to be programmed when the Advisor MASTER system is first installed, or if
the time needs to be adjusted for daylight saving.
The time is programmed for a 24 hour clock.
1. Access menu option 15.
The main menu shows:
To check the time setting press 1
The display shows:
Example:
Press [MENU*] to get an updated time/date.
Press [ENTER] to return to the main menu.
To program a new time and date
1. Enter option 2.
The display shows:
(Where hh:mm dd/mm/yy Xxxxday are the current time and date held by the system as hour, minute, day,
month, year and day of the week.)
2. Enter the correct hour (2 digits) and press [ENTER].
The display shows:
3. Enter the correct minutes (2 digits) and press [ENTER].
The display shows:
4. Enter the correct day (2 digits) and press [ENTER].
Time 1-Display, 2-Set, 3-DST, 4-Adjust
0-Exit, Menu:
Time 16:41:22 09/03/2000 Thursday
* Update, Enter
Time & Date hh:mm:ss dd/mm/yy Xxxday
Hours:
Time & Date hh:mm:ss dd/mm/yy Xxxday
Minutes:
Time & Date hh:mm dd/mm/yy Xxxday
Day:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advisor masterats110 series

Table of Contents