Start Auto Disarm Test - GE Advisor MASTER ATS111 series Manager Manual

13. Start auto Disarm test

Use this function to start the disarm test.
To start the disarm test
1. Access menu option 13.
The display shows:
2. Press:
•
[NEXT] to display the untested zones, or
•
0 and [ENTER] to cancel the arm test and move on to test completed/not completed
display.
3. If you have pressed [NEXT], the untested zones are displayed either one at a time or as a list:
Zones displayed one at a time
For example:
Untested Disarm On 4. PIR In Office
NEXT or ENTER
4. For either display, you can now:
Option
Display the description of the selected zone (when displayed as
a list of numbers only)
Display the remaining untested zones (if any)
Move on to the Camera Test or Test Completed/Not Completed
display
5. The display might shows information about cameras:
Press [ENTER] to return to the original option display.
Note that only cameras allocated to Area 1 are tested.
6. The testing automatically stops when:
•
all zones that are programmed to be tested during disarm test have been tested, or
•
the time allowed for the disarm test has expired.
The display then indicates if the test is completed or not.
Disarm Test, NEXT For Untested
"0"-Cancel:
All Cameras Have Tested Successfully
Press ENTER
Zones displayed as a list
For example:
Untested On 1, 2, 4.
Zone No:
Action
Enter the zone number and press [ENTER]
Press [NEXT]
Press [ENTER]
43