GE Advisor MASTER ATS111 series Manager Manual page 34

34
ATS Control Panel
Manager's manual
Option
Display complete zone name
Update the list of zones and display the remaining
zone (if any)
If zone test report is displayed, display the camera
test results (if applicable)
Exit
•
Arm test:
All zones tested successfully
No Untested Zones
Press ENTER
5. From the display you can now:
Option
Display the complete zone name
Update the list of zones and display the remaining zones (if any)
Exit
Action
Enter the zone number and press [ENTER]
Press [NEXT]
Press [ENTER]
Press [ENTER]
Untested zones
Untested zones are listed either one at a time, or as a list of numbers:
Untested Arm On 17, Rear Door Contact
NEXT or ENTER
or
Untested Arm On 9, 14, 17.
Zone No:
Action
Enter the zone number and press [ENTER]
Press [NEXT]
Press [ENTER]