Table of Contents
Advertisement
Tool:
4
33
43
33
3
5mm Allen Wrench with
Philips Screwdriver
1
42
33
33
Step 3
Attach both Left and Right Base Covers (42, 43) onto Base Frame with four St4.2x13
Cross Recessed Pan Head Tapping Screws (33). Tighten bolts with the 5mm Allen
Wrench with Phillips Screwdriver provided.
Hardware:
(33) Cross Recessed Pan Head
Tapping Screw ST4.2x13
4 PCS
Tool:
6mm Allen Wrench
Step 4
The running belt has been adjusted to the running deck at the factory before it was
shipped. At times the running belt may get slippery during shipment. After the treadmill is
completely assembled, use the 6mm Allen Wrench provided to turn the both left and right
rear roller adjustment bolts 1/4 turn clockwise before using the treadmill.
11
Advertisement
Table of Contents
