Button Control - FDS FD141CV-C-3 Installation And Operation Manual

Button Controls
Located on the front-right side of the FD141CV-C-3 are 8 buttons. Their corresponding
labels are located on the left side of the monitor. These buttons are used to power up the
unit and navigate through the different menus. The menu button is used as a toggle,
push to view the menu screens, push again to exit.
BUTTON DESCRIPTION
PWR Turns ON/OFF the system.
MENU Activates the OSD menu or goes
to previous menu.
AUTO Auto-adjustment in RGB.
Moves the highlight icon up to
the function that user wants.
Moves the highlight icon down to
the function that user wants.
Decreases the adjustment of the
selected function.
Increases the adjustment of the
selected function.
SCE* Selects the Input Signal among
VGA/DVI/Composite/SDI.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD141CV-C-3
Revision Date:
Rev:
04/27/2017
B
Page 11 of 16
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com