Id Card Copy - Fuji Xerox DocuCentre S2110 User Manual

Copy
Magnification Table
When you make enlarged/reduced copies from standard size documents on standard size
paper, the following copy ratios will be applied.
Documents

ID Card Copy

You can copy both sides of an ID card (name card, employee card, etc.) on one side of
paper.
The zoom ratio is fixed to 100% for the ID Card Copy feature.
Press the <ID Card Copy> button to enable this feature.
5
Important
Note
You can select the copy mode from the one card mode and the multiple mode. The
following shows some examples of output images.
One card mode: Copying both side of an ID card in one sheet
Place the document inside the short side of A5 size (148 mm) referring to the document
glass scale with 5 mm of distance in four directions.
Original document
98
Copy
/ A5
A5 100%
B5 81%
A4 70%
B4 57%
A3 50%
Place an ID card in the upright position.
The minimum size of document for the ID Card Copy feature is ISO/IEC 7810 ID-1 (approx. 86 x 54 mm).
When the ID Card Copy feature is enabled, the Collated feature becomes disabled.
When a document is placed in the document feeder, the ID Card Copy feature becomes disabled.
The default image quality settings for the ID Card Copy feature are as follows:
Original Type: Photo & Text
Background Suppression: Off
Front side
Front side
Back side
B5 A4
122% 141%
100% 115%
86% 100%
70% 81%
61% 70%
Original orientation
Back side
B4 A3
172% 200%
141% 163%
122% 141%
100% 115%
86% 100%
Copied output