No.
11
Bypass tray
12
Left cover [A]
Right Side, Rear
5
4
No.
1
Power switch
2
Power cord connector
3
Adjusting foot
4
USB 2.0 interface connector
(Type B)
5
100BASE-TX interface
connector
Component
Load paper here. The tray can be extended.
Open this cover to remove any jammed paper.
Note
When the machine works properly, this cover is locked. To
open this cover, make sure to exit Sleep mode and turn the
machine's power OFF.
Component
Switches the power of the machine on and off.
Reference
For more information, refer to "Power Source" (P.46).
Connects the power cord.
Prevents the machine from toppling over. Move the
machine to its installation site and then rotate this adjuster
in clockwise direction until it touches a floor.
Connect a USB 2.0 cable.
Connect a network cable.
Machine Components
Description
1
2
3
Description
3
43