Setting Static Colors; Automatic Mode - Event Lighting PANBEAM4x4x10 User Manual

Setting Static Colors

Entered "Static Color", you can select the desired solid color via the UP or DOW N buttons and confirm by Enter
(see following graphic).
Mode: RGBW Models
Value:
R
G
B
W
GB
RB
RG
Static Colour RGB
RW
GW
BW
RGW
RBW
GBW
RGBW

Automatic Mode

This fixture has a built-in automatic program.
Entered "Auto Program" mode, use <UP> and <DOW N> to select the built-in programs "Pr01 ~ Pr -12"
then press the "Enter" to confirm.
Use <UP> and <DOWN> to select the operating speed of the program(Value:Speed 000 ~ Speed100, Freeze,Slow ~ Fast),
Mode: Value:
Auto program Pr 01
Auto program Pr 02
Auto program Pr 03
Auto program Pr 04
Auto
Auto program Pr 05
Program
Auto program Pr 06
Auto program Pr 07
Auto program Pr 08
Auto program Pr 09
Master/Slave Operation
This mode allows for multiple units slave fixtures to follow a single master fixture.
1) Set the master fixture to one of the standalone operating modes: automatic, sound, user mode or static color modes
2) For slave units, entered the Master/Slave mode, select "Slave", press Enter.
5
Function:
Red
Green
Blue
White
Green + Blue
Red + Blue
Red + Green
Red + Green + Blue
Red + White
Green + White
Blue + White
Red + Green + White
Red + Blue + White
Green + Blue + White
Red + Green +
Blue + White
Function:
R G B W colors switching
15 colors switching
Color Macros
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Loop above Pro 01~ Pr 08