Hardware Installation - GE akta pure Operating Instructions Manual

4 Installation

4.2 Hardware installation

4.2 Hardware installation
Introduction
This section describes the unpacking and installation procedures for ÄKTA pure.
In this section
This section contains the following subsections:
Section
4.2.1 Unpack the instrument
4.2.2 Install the computer equipment
4.2.3 Connect system units
4.2.4 Install waste tubing
4.2.5 Prepare the pump rinsing system
68
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Power cord. Only use power cords with approved plugs delivered
or approved by GE.
WARNING
Access to power switch and power cord with plug. Do not block
access to the power switch and power cord. The power switch
must always be easy to access. The power cord with plug must
always be easy to disconnect.
ÄKTA pure Operating Instructions 29022997 AF
See page
70
76
77
80
83