Activate Power-Save - GE akta pure Operating Instructions Manual

4 Installation

4.7 Activate Power-save

4.7 Activate Power-save
Introduction
ÄKTA pure has a power-save mode. The instrument enters Power-save after having
been in the Ready state for a set period of time. The system enters the Ready state when
a method run, a method queue or a manual run ends.
Enable power-save
To enable Power-save, a system must be connected and in state Ready.
Follow the instructions below to activate Power-save.
Step
1
2
3
100
Action
In the System Control module, on the System menu. click Settings.
Result: The System Settings dialog opens.
Click Advanced
•
and
select Power-save.
•
Click On in the Mode field
•
and
type the number of minutes in the Time field.
•
Note:
This is the time the instrument will be in state Ready before power-save
mode is entered.
Click OK.
•
ÄKTA pure Operating Instructions 29022997 AF