GE akta pure Operating Instructions Manual page 130

6 Run a method
6.5 After run procedures
In the following situations, in order to increase the lifetime of the pH electrode, use the
By-pass position and store the electrode in storage solution inside the pH flow cell:
•
•
•
For further information on how to prepare the pH electrode for storage, refer to ÄKTA
pure User Manual.
Log off or exit UNICORN
Follow the instructions to log off or exit UNICORN. This can be performed from any of
the UNICORN modules.
If you want to...
log off UNICORN
exit UNICORN
Note:
130
pH monitoring is not needed during the run.
Organic solutions are used.
Extremely acidic or extremely basic solutions are used.
If an edited method or result is open and not saved when you try to exit or log
off UNICORN, you will see a warning. Click Yes to save, No to exit without
saving, or Cancel to stay logged on.
then...
on the File menu, click Log off.
Result: All open UNICORN modules close and the Log On
dialog box opens.
on the File menu, click Exit UNICORN.
Result: All open UNICORN modules close.
ÄKTA pure Operating Instructions 29022997 AF