Hardware Installation - GE ÄKTA pure Operating Instructions Manual

4 Installation

4.2 Hardware installation

4.2

Hardware installation

Introduction
This section describes the installation procedure for ÄKTA pure.
In this section
This section contains the following subsections:
Section
4.2.1 Unpack the instrument
4.2.2 Install the computer equipment
4.2.3 Connect system units
4.2.4 Prepare waste tubing
4.2.5 Prepare the pump rinsing system
4.2.6 Start the instrument and the computer
60
WARNING
Protective ground. The ÄKTA pure instrument must always be
connected to a grounded power outlet.
WARNING
Only use grounded power cords delivered or approved by GE.
WARNING
Do not block access to the power switch and power cord. The
power switch must always be easy to access. The power cord with
plug must always be easy to disconnect.
ÄKTA pure Operating Instructions 29-0229-97 AE
See page
61
67
68
71
74
77