GE akta pure Operating Instructions Manual page 34

2 Safety instructions
2.3 Emergency procedures
Step
2
3
4
Uninterruptible power supply
(UPS)
A UPS can prevent data loss during a power failure, and allow time for a controlled shut-
down of ÄKTA pure.
For UPS power requirements, see the system specifications in this manual. Remember
to also take into account the specifications for the computer and monitor. Refer to the
manufacturers' documentation.
Note:
34
Action
If the instrument was switched off, press the Power switch on the instrument.
Result: The instrument should start and the Instrument control panel should
display a white, slowly flashing light.
Turn on the computer and monitor.
Start UNICORN and connect to the system.
See instructions in Section 4.4 Start UNICORN and connect to system, on
page 88.
If using a UPS, the ÄKTA pure instrument, the computer and the monitor must
be connected to the UPS.
ÄKTA pure Operating Instructions 29022997 AF