Call Barring; Network Selection; Security Settings - TIPTEL Ergophone 6040 Operating Instructions Manual

Settings
you specify that calls are only diverted if your telephone is switched
off or not logged onto the network.
Select the diversion type you require with the dial key. In the sub-
menu, you can then enable or disable the diversion, and query the
current status with the network provider.
After enabling it you will be asked whether you want to divert callers
to your voicemail box (the answering machine) or to a different num-
ber.

Call barring

In this configuration item you can set up call blocking for outgoing
and incoming calls. Your service provider has to support call blocking
and, to set it up, you require the PIN2 that your provider has given
you.

Network selection

Here you can set whether your telephone is to automatically search
for the mobile network, or if you prefer to select the network manually.
With an automatic search, your telephone, in this country, always au-
tomatically logs onto your supplier's network, while outside this coun-
try it logs onto the network with the best reception. Manual selection
only makes sense outside this country and only if you want to use a
particular network there, e.g. because you know that the charges for
their roaming calls are cheaper than those of other networks.

Security settings

This is where you can set up the PIN queries for the SIM card and the
telephone.
44