Setting The Time And Date - TIPTEL Ergophone 6040 Operating Instructions Manual

Note: You can change your SIM card PIN using the telephone
settings, and you can also disable the PIN prompt given
when the telephone is switched on.
The telephone is now ready to be used.

Setting the time and date

After the telephone has been switched on for the first time (and after
removing the battery), the time and date need to be set.
To do this, press the
menu to select the "Settings" entry, and then press the dial key
In the Settings menu, select "Phone settings" and press the dial key
again.
Then, in the Phone Settings menu, select the "Time and Date" entry,
and press the dial key
The time appears in the HH:MM (hours:minutes) format, and the
hours item is currently selected. Use the number keys to enter the
current hour. The minutes item is then selected. Use the number keys
to enter the current minutes. So, to set the time to 13:06, you would
need to first enter 13 and then 06. Then press the
the date.
Use the number keys to enter the current date in the YYYY:MM:DD
format, i.e. first the year (four digits), then the month and then the day
(both two digits). So, for the 23rd August 2011, you would first have
to enter 2011, then 08, and then 23. Confirm your entries with the
hang up key
Then press the hang up key
back to its base status. The correct time and date should now be
shown in the display.
Bringing into service
key, then use the
again.
.
key in the main
several times until the telephone is
10
.
key to enter