Alert Type; Ring Type; Answer Mode; Speed Dial - TIPTEL Ergophone 6040 Operating Instructions Manual

Note: During a call, the volume of the receiver is adjusted using
the rocker switch with the + and – symbol on the left of
the device. This change will then be automatically saved.

Alert type

Here you set whether your telephone will only ring, only vibrate, first
vibrate and then ring, or ring and vibrate at the same time.

Ring type

Here you can set whether, for incoming calls, your telephone will play
the ringtone just once, or repeatedly, or ascending (starting quietly
and getting louder).

Answer mode

Here you can specify that incoming calls can be taken not only with
the dial key

Speed dial

Here you can assign the speed dial numbers to the numerals
When you press the key concerned for about 2 seconds, the number
of the contact selected here is dialled. Under "Set number", for each
numeral you can select a contact who is dialled when you keep the
key pressed down. Under "Status" you switch the speed dial function
on and off.

Talking keys

Here you switch the "Talking keys" on and off. If they are switched on,
the telephone speaks the numbers
verification purposes.
Settings
, but with any key you want.
t o when they are pressed, for
 
42
to .
 