Contrast; Lcd Backlight; Sound Settings; Tone Settings - TIPTEL Ergophone 6040 Operating Instructions Manual

Table of Contents

Contrast

Here you can change the contrast in the display. Select a setting

which enables you to easily read the text on the background. Make

any change with the

Here you can specify how long the display light will remain on if no

key is pressed. Possible values are 5 to 60 seconds. Make any

change with the

Here you specify the device's tones and the type of signal.

Note:

This setting is available in normal mode only not in silent

mode.

Here you select the tones for incoming calls, the alarm, power the de-

vice on and off, messages (SMS) and for the keypad.

When you select the relevant item, the melody that is currently set

plays and you can use the arrow keys to change it. When you press

the dial key the selected melody is saved.

With the key tones, you can choose between a tone and a clicking

sound and switching the key tone off.

Here you can set the volume of the tones (incoming calls, messages

and Alarm) and the key tone.

Settings

and

keys.

and

keys.

Table of Contents