Slip Feed Mechanism; Positioning Slip Paper - Epson TM-U675 Service Manual

Confidential

Slip Feed Mechanism

The slip feed mechanism is comprised of the following parts:
Form stopper
Sub slip feed lever
Sub slip feed roller
Sub slip hold roller
Slip feed roller
Slip hold roller
Paper feed motor and wheel

Positioning slip paper

The slip paper path is normally interrupted by the form stopper, located perpendicular to the
path, which is held in place by the form stopper spring. When a slip is inserted along the right
edge of the slip guide lower frame in the direction indicated by the arrow, the slip paper goes in
as far as the form stopper and is positioned. (See Figure D-34.)
When the paper feed motor rotates several times forward and reverse while energizing the J/S
change solenoid, the J/S change lever will switch the J/S change gear that had been engaged
with the roll paper feed gear so that it is engaged with the slip paper feed gear. (See Figure D-
35.)
Slip guide upper frame
B.O.F. detector
assembly
Slip paper
Slip guide lower frame
Rev.D
T.O.F. detector
assembly
Sub slip hold roller Slip hold roller
b
Sub slip feed roller Form stopper
Figure D-34
TM-U675/U675P (with autocutter) Service Manual
Slip feed roller
Lever drive cam
a
Sub slip feed lever
Product Overview Appendix D-25
Paper feed trigger attraction plate
Lever drive coil