Epson TM-U675 Service Manual page 131

Confidential
3. Insert the two tabs on the mechanism assembly (M-U675) into the two slits in the
strengthening plate.
4. Position the nibs and nib holes shown in the illustration and attach the two insulator spacer
assemblies. The flange of the metallic insulator spacer should be facing downward.
5. Fasten the mechanism assembly (M-U675) using one screw.
Note:
The assist frame sub assembly is not included in the mechanism assembly supplied as a service part
Nib holes
nsulator spacer
ssemblies
Rev.D
Nibs
TM-U675/U675P (with autocutter) Service Manual
106 Screw (C.B.S-tite F, 3X6)
600 Mechanism assembly (type BB)
Figure 2-98
Flange of
the metallic insulator spacer
Assembly and Disassembly 2-97
.