Epson TM-U675 Service Manual page 64

Confidential
4. Attach the sub paper feed roller assembly and the crank shaft holders to the paper feed
frame assembly.
5. Lubricate the areas where the sub paper feed roller assembly and the crank shaft holder are
in contact.
6. Attach the parallel pin and paper feed gear to the sub paper feed shaft with two E-rings.
722
E-ring (4)
G-48
2-30 Assembly and Disassembly
730
Crank shaft
holder
Sub paper feed roller assembly
699 Sub paper feed roller assembly
699
Figure 2-30
G-48
602 Parallel pin (1.6X10)
730 Crank shaft holder
648 Paper feed gear
722 E-ring (4)
602
Rev.D