Epson TM-U675 Service Manual page 55

Confidential
17. Attach the carriage assembly to the carriage frame sub assembly. When doing so, set the
carriage spring under the bent part on the carriage frame sub assembly as shown in the
illustration. Insert the carriage guide shaft and secure it with one E-ring.
18. Lubricate the right and left sides of the carriage guide shaft.
19. Hook the carriage belt onto the carriage drive pulley (shown with "1" in the illustration) and
carriage transmission pulley (shown with "2" in the illustration) in that order.
20. Tighten the screw (the screw loosened in step 15) on the lead wire side of the carriage motor.
21. Secure another screw to firmly tighten the carriage motor.
688
Carriage
frame sub
assembly
611 Carriage spring
688
Carriage frame sub assembly
Rev.D
1
709
775
Carriage assembly
Screw (C.P.S-tite(P4), 3x6)
Figure 2-20
TM-U675/U675P (with autocutter) Service Manual
723 E-ring (5)
2
O-10
631
Carriage guide shaft
Assembly and Disassembly 2-21
O-10