Confidential
Removing Paper Jams
Paper Jams in the Autocutter
Retract the autocutter movable blade using the following procedure.
1. Pull the latch levers on the right and left sides to the front and open the roll paper cover.
2. Rotate the knob on the autocutter in the direction of the arrow to align the axis with the
circular hole (marked with a triangular hole) in the center of the arc-shaped slit.
3. Remove the paper.
knob
marked arrow
Paper Jams in the Roll Paper
1. Pull the latch lever to the front and open the roll paper cover.
2. Remove the take-up assembly.
3. Open the clamshell mechanism while pushing on the levers on both ends.
levers
Rev.D
TM-U675/U675P (with autocutter) Service Manual
Figure 1-15
Figure 1-16
arc-shaped slit
axis
Troubleshooting 1-19