Epson TM-U675 Service Manual page 118

Confidential
64. Attach the paper feed frame stopper and belt plate to the main frame sub assembly.
65. Solder the intermediate cables (type A, B, and C) to the main circuit board assembly.
Note:
See Figure 2-93 on page 2-93 and Table 2-1 for details on where to solder.
66. Align the front cover detector assembly with the nib on the main frame and attach (with one
screw).
67. Solder the lead wires of the front cover detector assembly to the main circuit board
assembly.
Note:
See Figure 2-93 on page 2-93 and Table 2-1 for details on where to solder.
2-84 Assembly and Disassembly
677 Paper feed frame stopper
684 Belt plate
726 Screw (C.B.S-tite F, 3X6)
714 Screw (C.B.S-tite F, 3X4)
691 Front cover detector assembly
Figure 2-84
Rev.D