Epson TM-U675 Service Manual page 133

Confidential
10. Pass the power switch cable assembly between the L-shaped piece in the main plate sub
assembly and the QM6 element on the main circuit board unit, as shown in the illustration.
11. Use insulated tape on the areas shown in the illustration to secure the power switch cable
assembly temporarily.
12. Connect the two circuit board FFCs to the main circuit board unit and the mechanism
assembly (M-U675) in that order. Bend the FFCs so that the fold is on the main circuit board
side.
Power switch cable assembly
Rev.D
203
Tape
TM-U675/U675P (with autocutter) Service Manual
206
Circuit board FFC
203 Power switch cable assembly
L-shaped piece in the main plate sub assembly
Figure 2-100
QM6
Assembly and Disassembly 2-99