Confidential
37. Attach the slip feed roller shaft holders to both sides of the sub slip hold roller starting from
the small diameter. Secure the holders with two E-rings.
38. Push the slip drive gear into the slip hold roller shaft starting from the side whose diameter
is larger.
39. Press the slip drive gear into the sub slip hold roller starting from the larger diameter.
721
E-ring (3)
610
Slip feed roller
shaft holder
2-70 Assembly and Disassembly
Figure 2-70
649 Slip drive gear
610 Slip feed roller shaft holder
721 E-ring (3)
649 Slip drive gear
Rev.D