Confidential
14. Insert the hole in the carriage motor onto the carriage frame sub assembly nib. Temporarily
fasten the screw on the lead wire side.
15. Loosen the screw you temporarily tightened in the previous step (less than one turn).
16. Hook the belt tension spring on the carriage motor and carriage frame sub assembly.
Nib
Carriage motor
775
Screw
(C.P.S-tite(P4), 3x6)
2-20 Assembly and Disassembly
733
630 Belt tension spring
Carriage frame sub assembly
Figure 2-19
Rev.D