Lennox CLIMATIC series User Manual page 38

COMMUNICATION
The submenus contains 2 types of data: the read only data (like a temperature probe for example) and the read/write setpoints (like
the cooling ambiant setpoint for example). The data are identifi ed by a cursor symbol ">" (and by a close-padlock in the upper right
corner) whereas the setpoint are identify by a symbol ">>" (and by an open-padlock in the upper right corner).
To modify a setting, move the cursor on the desired item and press the "←" key. A new screen displays information concerning this
set point. To modify it, use the "↓" and "↑" keys and validate by pressing the "←" key. If the setting is customizable according to the
schedule mode, press the "PRG" key to select different value for the Day, Day I, Day II & Night mode.
: to quickly increment or decrement the setting, hold the "↓" or "↑" keys during some time.
• 36 •

   
   
   
   
   
   
  

Customizable setting for different mode
Cursor symbol for data

   
   
   
   
   
   
  

Cursor symbol for set point

 
  
  
 
Actual set point
Maximum value
Factory value
Minimum value
User save value
CLIMATIC RT_UNITARY-IOM-1508-E