Olivetti d-Color MF2613 Plus Service Manual page 65

Item No.
U203 Checking DP operation
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.
Display
Normal Speed
High Speed
4. Press the start key.
5. Select the item to be operated.
Display
CCD ADP
CCD RADP
CCD ADP (Non-P)
CCD RADP (Non-P)
6. Press the start key. The operation starts.
7. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116670-7
Description
Description
Normal reading (600 dpi)
High-speed reading
Description
With paper, single-sided original of CCD
With paper, double-sided original of CCD
Without paper, single-sided original of CCD
(continuous operation)
Without paper, double-sided original of CCD
(continuous operation)
1-3-27
2PX/2PY
Service Manual