Code
Contents
3500
Communication error
between scanner and ASIC
An error code is detected.
4001
Polygon motor KM error
The polygon motor KM ready
input is not given for 10 s dur-
ing the polygon motor is ON.
4002
Polygon motor CY error
The polygon motor CY ready
input is not given for 10 s dur-
ing the polygon motor is ON.
4201
Laser output error (black)
The pin photo signal is not
output from PD PWB K for
one second while laser is
emitted.
Y116670-7
Causes
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
CCD PWB (YC1) and main PWB (YC8)
Defective CCD
Replace the scanner unit (see page 1-5-48).
PWB.
Defective main
Replace the main PWB and check for cor-
PWB.
rect operation (see page 1-5-30).
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
Laser scanner unit KM and engine PWB
(YC31)
Defective polygon
Replace the laser scanner unit KM (see
motor KM.
page 1-5-45).
Defective engine
Replace the engine PWB and check for cor-
PWB.
rect operation (see page 1-5-27).
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
Laser scanner unit CY and engine PWB
(YC31)
Defective polygon
Replace the laser scanner unit CY (see
motor CY.
page 1-5-45).
Defective engine
Replace the engine PWB and check for cor-
PWB.
rect operation (see page 1-5-27).
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
APC PWB K and engine PWB (YC31)
Defective APC
Replace the laser scanner unit KM (see
PWB K.
page 1-5-45).
Defective PD PWB
Replace the laser scanner unit KM (see
K.
page 1-5-45).
Defective engine
Replace the engine PWB and check for cor-
PWB.
rect operation (see page 1-5-27).
1-4-17
Check procedures/
corrective measures
Service Manual
2PX/2PY