(3) Detaching and refitting the paper feed drive unit
Procedure
1. Remove the rear upper cover, right
upper cover, left upper cover and front
cover (see page 1-5-3).
2. Remove the left rear cover, left cover
and left lower cover (see page 1-5-9).
3. Remove connector (YC3) from engine
PWB.
4. Remove four screws and then remove
the paper feed drive unit.
5. Check or replace the paper feed drive
unit and refit all the removed parts.
Service Manual
Engine PWB
YC3
Engine PWB
Screw
Screw
Paper feed
drive unit
Screw Screw
1-5-40
Figure 1-5-60
Figure 1-5-61
2PX/2PY
Y116670-7