Olivetti d-Color MF2613 Plus Service Manual page 105

Item No.
U660 Setting the NCU
Description
Makes setting regarding the network control unit (NCU).
Purpose
To be executed as required.
Method
1. Press the start key.
2. Select the item to be set.
Display
Exchange
Dial Tone
Busy Tone
PBX Setting
DC Loop
Setting the connection to PBX/PSTN
Selects if a fax is to be connected to either a PBX or public switched telephone network.
1. Select the setting.
Display
PSTN
PBX
* : Initial setting: PSTN
2. Press the start key. The setting is set.
Setting PSTN dial tone detection
Selects if the dial tone is detected to check the telephone is off the hook when a fax is connected
to a public switched telephone network.
1. Select the setting.
Display
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Y116670-7
Description
Description
Sets the connection to PBX/PSTN.
Sets PSTN dial tone detection.
Sets busy tone detection.
Setting for a PBX.
Sets the loop current detection before dialing.
Description
Connected to the public switched telephone network.
Connected to a PBX.
Description
Detects the dial tone.
Does not detect the dial tone.
1-3-67
2PX/2PY
Service Manual