(2) Detaching and refitting the drum/developing drive unit
Procedure
1. Remove drum units (K, M, C, Y) and
developing units (K, M, C, Y) (see page
1-5-21, 19).
2. Remove the rear upper cover, right
upper cover, left upper cover and front
cover (see page 1-5-3).
3. Remove the left rear cover, left cover
and left lower cover (see page 1-5-9).
4. Remove the engine PWB (see page 1-
5-27).
5. Remove the screw and release the
hook, and then remove the container
fan unit.
6. Remove the screw and then remove the
ID guide.
Service Manual
Hook
Screw
Container
fan unit
Figure 1-5-57
Screw
ID guide
Figure 1-5-58
1-5-38
2PX/2PY
Container
fan unit
Y116670-7