Detaching And Refitting Pf Paper Size Width Switch 1, 2 - Olivetti PF-720 Service Manual

(2) Detaching and refitting PF paper size width switch 1, 2

Replace PF paper size width switch 1 and 2 as follows.
Caution:
After replacing paper feeder paper width switch, be sure to perform (4) Adjusting the position of the rack adjuster.
Procedure
1. Remove the cassette.
2. Remove two screws and 8-pin socket from
the rear of the cassette.
3. Detach the 8-pin connector of the PF paper
size width switch from the 8-pin socket.
4. Remove three screws holding the rack
adjuster.
5. While raising the cassette lift plate in the
direction of the arrow, remove the rack
adjuster.
Y112020-4
Screw
Cassette lift plate
8-pin socket
Screw
Service Manual
Screw
Rack adjuster
Cassette
8-pin connector
Screw
Figure 1-5-8
3LM
Screw
1-5-5