Package Contents - IAI GO-2400M-USB User Manual

Item
Gain adjustment Manual adjustment range
Auto gain
WB gain
WB Preset
WB area
WB range
White balance
Blemish correction Detection
Correction
Correctable pixels
ALC
Gamma
LUT
Power supply 6-pin
connector
USB bus
power
Lens mount
Flange back
Optical filter
Verified performance temperature / humidity
Storage temperature / humidity
Regulations
Dimensions (housing)
Weight
Approximately 5 minutes of warm-up are required to achieve these specifications.

Package contents

Camera body (1)
Sensor protection cap (1)
Dear Customer (sheet) (1)
Optional accessories (not supplied)
MP-43 tripod mount
AC adapter
Design and specifications are subject to change without notice.
Interpolation using adjacent pixels (continuous blemishes not
Can be adjusted automatically together with AGC and auto exposure
Input range
Power consumption
Input range
Power consumption
Lens mount protrusion length of 9 mm or less is supported
Protective glass: Not provided
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS,
29 × 29 × 41.5 mm (WHD) (excluding mount protrutions)
— 56 —
GO-2400M-USB / GO-2400C-USB
GO-2400M-USB
0 dB to +24 dB
Off, Continuous
— R / B: –7 dB to +15 dB, 1 step =
—
—
—
—
Detect white blemishes using threshold values
(black blemish correction performed only at factory)
corrected)
256 pixels
0.45, 0.6 an, 1.0 (OFF) (3 steps available)
OFF: γ = 1.0, ON = 257 points can be set
DC +12 V to +24 V ±10% (via input terminal)
4.08 W (at 12 V input, full pixel) (Typical)
DC 36 V to 57 V
4.1 W (at 5 V input, full pixel) (Typical)
C-mount
17.526, tolerance: 0 mm to –0.05 m
IR cut filter (half value of 670 nm)
–5°C to +45°C / 20% to 80% (non-condensing)
–25°C to +60°C / 20% to 80% (non-condensing)
WEEE
46 g
GO-2400C-USB
0 dB to +24 dB
Off, Continuous
0.1 dB
4600K, 5600K, 6500K
16 (4 × 4) Area
3000 K to 9000 K
Off, Continuous, Once