Table of Contents
Advertisement
Item
Chunk Selector
Chunk Enable
k) Transport Layer Control
Payload Size (B)
Device Tap Geometry
l) JAI Custom Control Pulse
Generators
Clock Pre-scaler
Pulse Generator Clock (MHz)
Pulse Generator Selector
Setting range
Chunk Image,
Chunk Offset X,
Chunk Offset Y,
Chunk Width,
Chunk Height,
Chunk Pixel Format,
Chunk Timestamp,
Chunk Line Status All,
Chunk Exposure rtime (us),
Chunk Gain All,
Chunk Gain Red,*
Chunk Gain Blue,*
Chunk Black Level All,
Chunk Sequencer Set
Active,
Chunk Frame Trigger
Counter,
Chunk Exposure Start
Counter,
Chunk Frame Start Counter,
Chunk Frame Transfer End
Counter,
Chunk Line Status All On
FVAL Start,
Chunk Device Temperature,
Chunk Device Serial
Number,
Chunk Device User ID
True, False
—
Geometry_1X1_1Y
1 to 4096
0.018127 to 74.25
Pulse Generator 0
— 50 —
GO-2400M-USB / GO-2400C-USB
Default value
Image
Select the information you want added to
the image data.
* GO-2400C-USB only
—
Select whether to add the information to
the image data.
Default value: [Chunk Image] only "True"
Display information on transport layer
control.
2354176
Display the payload size.
Geometry_1X1_
Set the transmission method for each time
1Y
images are transmitted from the device
(TAP structure).
Configure pulse generator settings.
165
Set the division value for the prescaler
(12-bit) using the pixel clock as the base
clock.
0.45
Set the clock used for the pulse
generator.
This value is calculated based on the
Clock Pre-Scaler value.
Pulse Generator
Select the pulse generator.
0
Description
Advertisement
Table of Contents
