Bayer Output Pattern; Pixel Format And Pixel Type; Gvsp_Pix_Mono8 (8Bit Output) - IAI AM-200GE User Manual

1023
890
32 Black Level
0
25
Analog Out [mV]

7.5. Bayer output pattern

The AB-200GE starts with GRG on odd lines and BGB on even lines as shown below.
If AOI is used, Offset Y can be set every 2 lines and therefore, it always starts with a
GRG sequence.
signal out

7.6. Pixel format and pixel type

In the GigE Vision Interface, GVSP (GigE Vision Streaming Protocol) is used for an
application layer protocol relying on the UDP transport layer protocol. It allows an
application to receive image data, image information and other information from a
device.
As for the sensors in the AM-200GE AND AB-200GE, the following pixel types supported
by GVSP are available.
With regard to the details of GVSP, please refer to the GigE Vision Specification
available from the AIA (www.machinevisiononline.org).
Model
AM-200GE
AB-200GE

7.6.1 GVSP_PIX_MONO8 (8bit output)

Y0
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
AM-200GE / AB-200GE
White Clip Level
100% Level
700 800
H1 H2
Gｒ R
V1
B Gb
V2
Gｒ R
V3
Fig. 22 Bayer sequence
Pixel Type supported
Mono8, Mono10, Mono10_Packed, Mono 12, Mono12_Packed
BayGR8, BayGR10, BayGR12, BayGR10_Packed,
BayGR12_Packed,RGB8_PACKED, YUV422_PACKED
Y1
Fig.21 Bit allocation
H3 H4 H5
Gｒ R Gｒ
B Gb B
Gｒ R Gｒ
Y2
- 25 -
H6 H7
R Gｒ
Gb B
R Gｒ