Parts Identification - IAI GO-2400M-USB User Manual

Parts Identification

①
1 Lens mount (C-mount)
Mount a C-mount lens, microscope adapter, etc. here.
Before mounting a lens, be sure to refer to "Step 2: Connecting Devices" (page 12) and confirm the
™
precautions for attaching a lens and the supported lens types.
2 USB 3.0 connector
Use a USB 3.0 compatible cable to connect this to a USB port on the computer.
3 Power/trigger LED
Indicates the power and trigger input status.
LED status and camera status
LED
Power / trigger LED
⑥
⑤
⑥
Light
Lit amber Camera initializing.
Lit green Camera in operation.
Blinking green During operation in trigger mode, trigger signals are being
input.
™ The blinking interval is not related to the actual input interval
of the external trigger.
— 8 —
GO-2400M-USB / GO-2400C-USB
②
④
Status
③