Table of Contents
Advertisement
1-1
Overview
The FatTwin F617H6-FT+/FTPT+ is a high-end server comprised of two main
subsystems: the F414IS-R1K62B 4U server chassis and the X9DRFF-7+/7T+ dual
processor serverboard in four hot-swap nodes. Please refer to our web site for
information on operating systems that have been certifi ed for use with the system
(www.supermicro.com).
In addition to the serverboard and chassis, various hardware components have been
included with the FatTwin F617H6-FT+/FTPT+ server, as listed below:
•
Four (4) 1U passive front CPU heat sinks (SNK-P0047PSC)
•
Four (4) 1U passive CPU heat sinks for MB w/ narrow ILM (SNK-P0047PS)
•
Four (4) power adapter boards (BPN-ADP-F418L-O-P)
•
Power Cables:
Four (4) 8pin to 2x2pin (50cm) and 2 SATA power connectors (46cm) and
(16cm) 18AWG power cables (CBL-PWEX-0511-01)
Four (4) 8 pin to 2 2x2(50/60-cm) and 2 SATA (26+16-cm) 18AWG power
cables (CPL-PWEX-0485-01)
•
SAS/SATA Backplane and accessories:
Four (4) backplanes for twelve (12) 3.5" HDD ( BPN-SAS-816T-A3-O-P)
Eight (8) 1U Hadroop backplanes for thirty-two (32) 3.5" HDD
(BPN-SAS-816T-A4-O-P)
Sixteen (16) 21-cm 30AWG SATA S-S cables (CBL-0473L)
Twelve (12) 81-cm 30AWG SATA S-S cables (CBL-0481L)
Four (4) 29-cm 30AWG SATA S-S cables (CBL-0483L)
Sixteen (16) 55-cm 30AWG SATA S-S cables (CBL-0484L)
•
Riser Cards:
Four (4) 1U LHS FatTwin PCI-E x16 riser cards with (RSC-R1UFF-E16-O-P)
Four (4) PCI-E x8 riser cards (RSC-R1UFF-E8R-O-P)
•
One (1) F418/F424 rail set (MCP-290-41803-0N)
•
Optional Power Supply: PWS-2K02P-1R
Note: If you are using the optional PWS-2K02P-1R power supply you will need
to use the C13 to C14 size 14AWG wire power cord set (14AWG/250V/15A, 3FT)
for the rack.
Chapter 1
Introduction
1-1
Chapter 1: Introduction
Advertisement
Table of Contents
