Preparing The Optical Impression; Automatic And Manual Release In The "Free Scan" Mode - Sirona inEos X5 Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions inEos X5
64 17 096 D3586
D3586.201.01.06.02 11.2016
9.4.1

Preparing the optical impression

✔
You have selected the desired image catalog (lower jaw, upper jaw
Fragment: Preparing a scan with the inEos X5
etc.).
Tip: Take special care to select the right image catalog for detail
scans.
1. Fasten the model to the supplied model holding plate with Blue Tack.
The labial side must face the straight edge of the plate.
or
Alternatively, you can use the parallel vise provided. In this case,
➢
the labial side faces the fastening screw.
2. Position the model holding plate used with the spherical model
holder.
"Capture Free"
3. Select the
 The articulating arm moves to its parking position.
 A section of the scan area appears in the live image.
 Green crosshairs appear in the live image.
9.4.2

Automatic and manual release in the "free scan" mode

When working in the
for releasing scans.
Capture Manual
"Capture Manual"
➢ Double-click the Start button.
or
Alternatively, you can use the return key on your keyboard or the
➢
"Capture Manual"
 An individual scan is taken with each release.
Capture Auto
"Capture Auto"
1. Select the
or
Alternatively, you can click on the Start button of the inEos X5.
➢
 The crosshairs in the live image turn green.
2. Start the scans by clicking the
or
Alternatively, you can click the Start button of the inEos X5 or
➢
press the Return key on your keyboard.
 The crosshairs in the live image turn blue.
 After the model has been moved or tilted and is again in the rest
position, exposures are automatically released.
3. Single-click the Start button of the inEos X5 to interrupt/end the
automatic release mode.
 The crosshairs in the live image turn green.
button in the Scan menu.
"Capture Free"
mode, there are several possibilities
is the standard inEos X5 mode.
button below the live preview.
mode in the Scan menu.
"Ok"
button in the software.
9 Performing 3D acquisition
9.4 Free scans
43